Optical pulse generation at frequencies up to 20 GHz using external-injection seeding of a gain-switched commercial Fabry-Pérot laser

We demonstrate that by using strong external-injection seeding of gain-switched Fabry-Perot (FP) lasers, it is possible to generate optical pulses at repetition rates far in excess of the laser bandwidth. Experimental results illustrate the generation of optical pulses at frequencies up to 20 GHz from a FP laser with a 3-dB bandwidth of only 8 GHz. The optical pulses generated have a duration around 12 ps, and a spectral width of 40 GHz

Effects of intermodulation distortion on the performance of a hybrid radio/fiber system employing a self-pulsating laser diode transmitter

A self-pulsating laser is used to generate a multicarrier (five radio frequency (RF) channels) microwave optical signal for use in a hybrid radio/fiber system. The self-pulsation is achieved by external light injection into the laser diode. By varying the RF channel spacing, we have been able to estimate the degradation in system performance due to intermodulation distortion (caused by the nonlinear dynamic response of the laser). The power penalty on the central RF channel is found to be 3.2 dB for operation at the RF band around the laser self-pulsation frequency of 18.5 GHz. We have also characterized the performance of the multicarrier hybrid radio/fiber system in the frequency band corresponding to the inherent relaxation frequency of the laser

Improved performance of a hybrid radio/fiber system using a directly modulated laser transmitter with external injection

A directly modulated laser diode with external light injection is used to generate microwave optical signals for a hybrid radio/fiber system. The external light injection greatly enhances the frequency response of the laser, and thus, significantly improves the overall performance of the hybrid system. Experimental results show a 14-dB improvement in system performance for the externally injected laser in a hybrid radio/fiber communication link used for distributing 155-Mb/s data signal

Multiple RF carrier distribution in a hybrid radio/fiber system employing a self-pulsating laser diode transmitter

A self-pulsating laser diode is used to generate a multicarrier microwave optical signal for use in a hybrid radio/fiber system. The self-pulsation frequency of the laser is controlled by external light injection, and can be varied between 14-24 GHz. The hybrid radio/fiber system, employing the self-pulsation laser, is used to distribute two 155-Mb/s data signals on two radio frequency (RF) carriers (at 18.5 and 18.9 GHz). Experimental results show the overall system performance for both RF channels, and demonstrate that the performance is improved by around 17 dB compared with the case when the laser is used without external injection, and thus, does not self-pulsat

Development of highly flexible broadband networks incorporating wavelength division multiplexing and sub-carrier division multiplexing in a hybrid radio/fiber distribution system

A radio over fiber distribution system incorporating both SCM and WDM technologies is presented. The SCM signal contains five 155 Mbit/s data channels, centered around 18.5 GHz with 450 MHz spacing. This signal is directly modulated onto three high-speed lasers with emission frequencies spaced by 50 GHz. Bragg filters are employed at the receiver base station in order both to demultiplex the required optical channel, and to ensure that the detected signal is single side band (in order to overcome dispersion limitations on the link). Our results show negligible degradation in system performance for the demultiplexing of the WDM signal compared with the back-to-back performance curves

Multifunctional operation of a fiber Bragg grating in a WDM/SCM radio over fiber distribution system

A radio over fiber distribution system incorporating both sub-carrier multiplexing (SCM) and wavelength division multiplexing (WDM) technologies is presented. The SCM signal contains five 155-Mbit/s data channels, centered around 18.5 GHz with 450 MHz spacing. This signal is directly modulated onto three high-speed lasers with emission frequencies spaced by 50 GHz. Bragg filters are employed at the receiver base-station in order to both demultiplex the required optical channel and ensure that the detected signal is single sideband (in order to overcome dispersion limitations on the link). Our results show negligible degradation in system performance for the demultiplexing of the WDM signal compared with the back-to-back performance curves

Generation of optical microwave signals using laser diodes with enhanced modulation response for hybrid radio/fiber systems

The authors present the idea of using a laser with improved modulation bandwidth to generate microwave optical signals for hybrid radio/fibre systems. External light injection has been used to enhance the frequency response of the laser and thus greatly improve the overall performance of the hybrid system. Experimental results show an 8 dB improvement in system performance for the externally injected laser in a hybrid radio/fibre system used for distributing 155 Mbit/s data signals on an 18 GHz carrie

Effect of side-mode suppression ratio on the performance of self-seeded gain-switched optical pulses in lightwave communications systems

The side-mode suppression ratio (SMSR) of self-seeded gain-switched optical pulses is shown to be an extremely important factor for the use of these pulses in optical communications systems. Experiments carried out involving pulse propagation through dispersion-shifted fiber and a bandpass optical filter demonstrate that, for SMSR values of less than 25 dB, the buildup of noise due to the mode partition effect may render these pulses unsuitable for use in optical communications system

Generation and optimization of picosecond optical pulses for use in hybrid WDM/OTDM networks

The burgeoning demand for broadband services such as database queries, home shopping, video-on-demand, remote education, telemedicine and videoconferencing will push the existing networks to their limits. This demand was mainly fueled by the brisk proliferation of Personal Computers (PC) together with the exceptional increases in their storage capacity and processing capabilities and the widespread availability of the internet. Hence the necessity, to develop high-speed optical technologies in order to construct large capacity networks, arises. Two of the most popular multiplexing techniques available in the optical domain that are used in the building of such high capacity networks, are Wavelength Division Multiplexing (WDM) and Optical Time Division Multiplexing (OTDM). However merging these two techniques to form very high-speed hybrid WDM/OTDM networks brings about the merits of both multiplexing technologies. This thesis examines the development of one of the key components (picosecond optical pulses) associated to such high-speed systems. Recent analysis has shown that RZ format is superior to conventional NRZ systems as it is easier to compensate for dispersion and nonlinear effects in the fibre by employing soliton-like propagation. In addition to this development, the use of wavelength tunability for dynamic provisioning is another area that is actively researched on. Self-seeding of a gain switched Fabry Perot laser is shown to one of the simplest and cost effective methods of generating, transform limited optical pulses that are wavelength tunable over very wide ranges. One of the vital characteristics of the above mentioned pulse sources, is their Side Mode Suppression Ratio (SMSR). This thesis examines in detail how the pulse SMSR affects the performance of high-speed WDM/OTDM systems that employ self-seeded gain-switched pulse sources

Generation of wavelength tunable optical pulses with SMSR exceeding 50 dB by self-seeding a gain-switched source containing two FP lasers

In this letter, we show the generation of shorter pulses (∼20 ps) that exhibit side mode suppression ratios (SMSR's) greater than 50 dB and wider tuning range (48.91 nm). Our technique is based on the self-seeding of a gain-switched source containing two FP lasers